sencure/sencure.ino

#include <Wire.h>

// Programma voor het sturen van patronen benodigd voor LATCH-UP.
// I2C : LETOP Little Endian ! , I2C is normaalgesproken Big Endian
// Benodigd :   OpzetBord met Logic Level Converter TXS108E.
//          :   Relay Bord 8-CH
// SENCURE SPECIFIEK
// Direct na startup is REG 0x15 = 0x00003;
// Wanneer 0x00001 naar REG 0xBF word gestuurd zal de chip rond de ~60uA gaan trekken (geverifieerd!).
// Na het script zal de chip rond de 1.5mA trekken.

const int deviceAddress = 0x68; // I2C address of the device (change as needed)
const uint8_t relay1 = 2; // LOW ACTIVE
const uint8_t relay2 = 3; // LOW ACTIVE
const uint8_t oe = 5;
const uint8_t d6 = 6; // Define pin D6
bool actionPerformed = false; // Flag to track if the action has been performed

// I2C Register Write Structure
struct I2C_Write {
    uint8_t reg;
    uint16_t data;
};

// Configuration Patterns
I2C_Write pattern1[] = {
    {0xBF, 0x0001}, {0x00, 0x0143}, {0x01, 0x0143}, {0x02, 0x0143}, {0x03, 0x0143},
    {0x04, 0x0143}, {0x05, 0x0143}, {0x06, 0x0143}, {0x07, 0x0143},
    {0x11, 0x00C0}, {0x12, 0x0001}, {0x14, 0x0028}, {0x15, 0x0002},
    {0x16, 0x0100}, {0x1F, 0x0007}, {0x53, 0x0170}
};

I2C_Write pattern2[] = {
    {0x46, 0x0902}, {0x47, 0x0021}, {0x48, 0x0023}, {0x49, 0x0023}, {0x4A, 0x0023},
    {0x4B, 0x0023}, {0x4C, 0x0023}, {0x4D, 0x0023}, {0x4E, 0x0023}, {0x4F, 0x005F},
    {0x44, 0x0FF8}, {0x52, 0x0001}, {0x2B, 0x0001}
};

I2C_Write intermediateData[] = {
    {0x55, 0x0000}, {0x56, 0x0000}, {0x57, 0x0000}, {0x58, 0x0000}, {0x59, 0x0000},
};

void relaysOn()
{
    //Relays are low active
    digitalWrite(relay1,LOW);
    digitalWrite(relay2,LOW);
    delay(5);
}

void relaysOff()
{
    //Relays are low active
    digitalWrite(relay1,HIGH);
    digitalWrite(relay2,HIGH);
    delay(5);
}
// Function to transmit 16-bit data in little-endian format
void transmitData(uint8_t registerAddress, uint16_t data) {

    digitalWrite(oe,HIGH);
    Wire.beginTransmission(deviceAddress);
    Wire.write(registerAddress); // Send the register address
    Wire.write(data & 0xFF);      // Send the low byte (LSB)
    Wire.write((data >> 8) & 0xFF); // Send the high byte (MSB)
    Wire.endTransmission();
    digitalWrite(oe,LOW);
}

// Function to read back data from the register
uint16_t readData(uint8_t registerAddress) {
    uint16_t receivedData = 0;
    digitalWrite(oe,HIGH);
    // First, send the register address to read from
    Wire.beginTransmission(deviceAddress);
    Wire.write(registerAddress); // Send the register address
    Wire.endTransmission();

    if (Wire.endTransmission() != 0) {
    Serial.println("Device not found");
    digitalWrite(oe,LOW);
    return 0; // Return 0 or some error code
}
    
    // Now request 2 bytes from the device
    Wire.requestFrom(deviceAddress, 2);
    if (Wire.available() == 2) {
        receivedData |= Wire.read();       // Read low byte (LSB)
        receivedData |= Wire.read() << 8; // Read high byte (MSB)
    }
    digitalWrite(oe,LOW);
    return receivedData;
}

void setup() {
    Serial.begin(9600);
    Wire.begin(); // Initialize I2C
    pinMode(relay1, OUTPUT);
    pinMode(relay2, OUTPUT);
    pinMode(oe, OUTPUT);
    pinMode(d6, INPUT); // Set D6 as input
    digitalWrite(oe,LOW);

    for(int i = 8; i <= 13; i++)
    {
        pinMode(i,OUTPUT);
        digitalWrite(i,LOW);
    }
}

void sendPattern1() {
    sendPattern(pattern1, sizeof(pattern1) / sizeof(pattern1[0]));
}

void sendPattern2() {
    sendPattern(pattern2, sizeof(pattern2) / sizeof(pattern2[0]));
}

void sendPattern(const I2C_Write* pattern, size_t size) {
    for (size_t i = 0; i < size; i++) {
        transmitData(pattern[i].reg, pattern[i].data);
        // Print the register address and data being transmitted using Serial
        Serial.print("Transmitting to Register: 0x");
        Serial.print(pattern[i].reg, HEX); // Print register address in hexadecimal
        Serial.print(", Data: ");
        printHex(pattern[i].data);
    }
}

void readPatternData(const I2C_Write* pattern, size_t size) {
    for (size_t i = 0; i < size; i++) {
        uint16_t receivedData = readData(pattern[i].reg);
        //Print the register address and received data
        Serial.print("Reading from Register 0x");
        Serial.print(pattern[i].reg, HEX);
        Serial.print(": ");
        printHex(receivedData);
    }
}

void readPattern1Data() {
    readPatternData(pattern1, sizeof(pattern1) / sizeof(pattern1[0]));
}

void readPattern2Data() {
    readPatternData(pattern2, sizeof(pattern2) / sizeof(pattern2[0]));
}

void readIntermediateData() {
    readPatternData(intermediateData, sizeof(intermediateData) / sizeof(intermediateData[0]));
}


void printHex(uint16_t value) {
    Serial.print("0x");
    if (value < 0x10) {
        Serial.print("000");
    } else if (value < 0x100) {
        Serial.print("00");
    } else if (value < 0x1000) {
        Serial.print("0");
    }
    Serial.println(value, HEX); // Print the value in hexadecimal
}

unsigned long lastDebounceTime = 0; // Last time the pin state changed
unsigned long debounceDelay = 50;    // Debounce delay in milliseconds
int lastD6State = LOW;                // Last stable state of D6
int currentD6State;                   // Current state of D6

void loop() {
    // Read the current state of D6
    int reading = digitalRead(d6);

    // Check if the state has changed
    if (reading != lastD6State) {
        // Reset the debounce timer
        lastDebounceTime = millis();
    }

    // If the state has been stable for the debounce delay, update the state
    if ((millis() - lastDebounceTime) > debounceDelay) {
        // Only proceed if the state has changed
        if (reading != currentD6State) {
            currentD6State = reading;

            // Only act if the new state is HIGH and the action hasn't been performed yet
            if (currentD6State == HIGH && !actionPerformed) {
                relaysOn();                
                sendPattern1();
                // Read back data
                readPattern1Data(); // Read Data Pattern 1
                relaysOff();
                // Set the action performed flag to true
                actionPerformed = true;
            }
        }
    }

    // If the state is LOW, reset the action performed flag
    if (currentD6State == LOW) {
        actionPerformed = false;
    }

    // Update the last stable state
    lastD6State = reading;
}