From 469c5cd7a60cdb9df1769974ebb5e05389ee5a54 Mon Sep 17 00:00:00 2001
From: Wesley Hofman <CHS5@me.eurofinseu.com>
Date: Fri, 19 Sep 2025 10:58:01 +0200
Subject: [PATCH] update

---
 sencure.ino | 64 +++++++++++++++++++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 21 deletions(-)

diff --git a/sencure.ino b/sencure.ino
index 09761ce..8c8ff90 100644
--- a/sencure.ino
+++ b/sencure.ino
@@ -1,5 +1,3 @@
-#include <Wire.h>
-
 // Programma voor het sturen van patronen benodigd voor LATCH-UP.
 // I2C : LETOP Little Endian ! , I2C is normaalgesproken Big Endian
 // Benodigd :   OpzetBord met Logic Level Converter TXS108E.
@@ -9,6 +7,13 @@
 // Wanneer 0x00001 naar REG 0xBF word gestuurd zal de chip rond de ~60uA gaan trekken (geverifieerd!).
 // Na het script zal de chip rond de 1.5mA trekken.
 
+//Duur van het script in DEBUG_MODE met serial op 115200 baud ~220ms + 20ms opstarttijd chip = 240ms ==> 300ms settling time scimitar
+//Duur van het script NOT in DEBUG_MODE mode ~40ms + 20ms opstarttijd chip = 60ms ==> 100ms settling time scimitar
+
+
+#include <Wire.h>
+#define DEBUG_MODE  // Uncomment this line to enable debug mode
+
 const int deviceAddress = 0x68; // I2C address of the device (change as needed)
 const uint8_t relay1 = 2; // LOW ACTIVE
 const uint8_t relay2 = 3; // LOW ACTIVE
@@ -26,7 +31,7 @@ struct I2C_Write {
 I2C_Write pattern1[] = {
     {0xBF, 0x0001}, {0x00, 0x0143}, {0x01, 0x0143}, {0x02, 0x0143}, {0x03, 0x0143},
     {0x04, 0x0143}, {0x05, 0x0143}, {0x06, 0x0143}, {0x07, 0x0143},
-    {0x11, 0x00C0}, {0x12, 0x0001}, {0x14, 0x0028}, {0x15, 0x0002},
+    {0x11, 0x00C0}, {0x12, 0x0001}, {0x14, 0x0028}, {0x15, 0x000D},
     {0x16, 0x0100}, {0x1F, 0x0007}, {0x53, 0x0170}
 };
 
@@ -37,7 +42,7 @@ I2C_Write pattern2[] = {
 };
 
 I2C_Write intermediateData[] = {
-    {0x55, 0x0000}, {0x56, 0x0000}, {0x57, 0x0000}, {0x58, 0x0000}, {0x59, 0x0000},
+    {0x55, 0x0000}, {0x56, 0x0000}, {0x57, 0x0000}, {0x58, 0x0000}
 };
 
 void relaysOn()
@@ -77,7 +82,9 @@ uint16_t readData(uint8_t registerAddress) {
     Wire.endTransmission();
 
     if (Wire.endTransmission() != 0) {
-    Serial.println("Device not found");
+    #ifdef DEBUG_MODE
+        Serial.println("Device not found");
+    #endif
     digitalWrite(oe,LOW);
     return 0; // Return 0 or some error code
 }
@@ -93,7 +100,9 @@ uint16_t readData(uint8_t registerAddress) {
 }
 
 void setup() {
-    Serial.begin(9600);
+    #ifdef DEBUG_MODE
+        Serial.begin(115200);
+    #endif
     Wire.begin(); // Initialize I2C
     pinMode(relay1, OUTPUT);
     pinMode(relay2, OUTPUT);
@@ -118,23 +127,27 @@ void sendPattern2() {
 
 void sendPattern(const I2C_Write* pattern, size_t size) {
     for (size_t i = 0; i < size; i++) {
-        transmitData(pattern[i].reg, pattern[i].data);
-        // Print the register address and data being transmitted using Serial
-        Serial.print("Transmitting to Register: 0x");
-        Serial.print(pattern[i].reg, HEX); // Print register address in hexadecimal
-        Serial.print(", Data: ");
-        printHex(pattern[i].data);
+        transmitData(pattern[i].reg, pattern[i].data);       
+        #ifdef DEBUG_MODE
+            // Print the register address and data being transmitted using Serial
+            Serial.print("Transmitting to Register: 0x");
+            Serial.print(pattern[i].reg, HEX); // Print register address in hexadecimal
+            Serial.print(", Data: ");
+            printHex(pattern[i].data);
+        #endif
     }
 }
 
 void readPatternData(const I2C_Write* pattern, size_t size) {
     for (size_t i = 0; i < size; i++) {
         uint16_t receivedData = readData(pattern[i].reg);
-        //Print the register address and received data
-        Serial.print("Reading from Register 0x");
-        Serial.print(pattern[i].reg, HEX);
-        Serial.print(": ");
-        printHex(receivedData);
+        #ifdef DEBUG_MODE
+            //Print the register address and received data
+            Serial.print("Reading from Register 0x");
+            Serial.print(pattern[i].reg, HEX);
+            Serial.print(": ");
+            printHex(receivedData);
+        #endif
     }
 }
 
@@ -164,7 +177,7 @@ void printHex(uint16_t value) {
 }
 
 unsigned long lastDebounceTime = 0; // Last time the pin state changed
-unsigned long debounceDelay = 50;    // Debounce delay in milliseconds
+unsigned long debounceDelay = 5;    // Debounce delay in milliseconds
 int lastD6State = LOW;                // Last stable state of D6
 int currentD6State;                   // Current state of D6
 
@@ -186,10 +199,19 @@ void loop() {
 
             // Only act if the new state is HIGH and the action hasn't been performed yet
             if (currentD6State == HIGH && !actionPerformed) {
-                relaysOn();                
+                // Switch Relay ON
+                relaysOn();           
+                // Send Pattern 1     
                 sendPattern1();
-                // Read back data
-                readPattern1Data(); // Read Data Pattern 1
+                // Read Data Pattern 1
+                readPattern1Data();
+                // Read back intermediat registers
+                readIntermediateData();
+                // Send Pattern 1     
+                sendPattern2();
+                // Read Data Pattern 1
+                readPattern2Data();  
+                // Switch Relay OFF          
                 relaysOff();
                 // Set the action performed flag to true
                 actionPerformed = true;