merge

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.gitignore

@@ -30,6 +30,7 @@ x86/
 bld/
 [Bb]in/
 [Oo]bj/
+[Oo]ut/
 [Ll]og/
 [Ll]ogs/
 

ScimitarStandardTemplate.sln

@@ -0,0 +1,25 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.34407.143
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ScimitarStandardTemplate", "ScimitarStandardTemplate\ScimitarStandardTemplate.csproj", "{3E555A2D-DC3F-4234-9FB4-4076BBFD4A25}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{3E555A2D-DC3F-4234-9FB4-4076BBFD4A25}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{3E555A2D-DC3F-4234-9FB4-4076BBFD4A25}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{3E555A2D-DC3F-4234-9FB4-4076BBFD4A25}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{3E555A2D-DC3F-4234-9FB4-4076BBFD4A25}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {FE93CF84-54EB-4AA5-AAF3-69FAE1B199BB}
+	EndGlobalSection
+EndGlobal

ScimitarStandardTemplate/App.config

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<configuration>
+    <startup> 
+        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" />
+    </startup>
+</configuration>

ScimitarStandardTemplate/App.xaml

@@ -0,0 +1,9 @@
+<Application x:Class="ScimitarStandardTemplate.App"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:local="clr-namespace:ScimitarStandardTemplate"
+             StartupUri="MainWindow.xaml">
+    <Application.Resources>
+         
+    </Application.Resources>
+</Application>

ScimitarStandardTemplate/App.xaml.cs

@@ -0,0 +1,17 @@
+using System;
+using System.Collections.Generic;
+using System.Configuration;
+using System.Data;
+using System.Linq;
+using System.Threading.Tasks;
+using System.Windows;
+
+namespace ScimitarStandardTemplate
+{
+    /// <summary>
+    /// Interaction logic for App.xaml
+    /// </summary>
+    public partial class App : Application
+    {
+    }
+}

ScimitarStandardTemplate/MainWindow.xaml

@@ -0,0 +1,20 @@
+<Window x:Class="ScimitarStandardTemplate.MainWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+        xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
+        xmlns:local="clr-namespace:ScimitarStandardTemplate"
+        mc:Ignorable="d"
+        x:Name="Main"
+        Title="MainWindow" Height="450" Width="800">
+    <Grid>
+        <StackPanel>
+            <Label HorizontalAlignment="Center" FontSize="22">Scimitar Standardizer</Label>
+            <Button Height="100">Config</Button>
+            <Button Height="100" Content="Browse" Click="BrowseButton_Click"></Button>
+            <Border BorderBrush="Black" BorderThickness="1" Height="100"/>
+            <Label DataContext="{Binding ElementName=Main}" Content="{Binding FileName}"></Label>
+        </StackPanel>
+        
+    </Grid>
+</Window>

ScimitarStandardTemplate/MainWindow.xaml.cs

@@ -0,0 +1,182 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Windows;
+using System.Windows.Controls;
+using System.Windows.Data;
+using System.Windows.Documents;
+using System.Windows.Input;
+using System.Windows.Media;
+using System.Windows.Media.Imaging;
+using System.Windows.Navigation;
+using System.Windows.Shapes;
+using System.Xml;
+using System.Xml.Serialization;
+
+namespace ScimitarStandardTemplate
+{
+    /// <summary>
+    /// Interaction logic for MainWindow.xaml
+    /// </summary>
+    public partial class MainWindow : Window
+    {
+        public string FileName { get; set; }
+        public List<spotMeasurement> spotMeasurements = new List<spotMeasurement>();
+        public List<curveTrace> curveTraces = new List<curveTrace>();
+        public XmlDocument xmlDocument = new XmlDocument();
+
+        public MainWindow()
+        {
+            InitializeComponent();
+            AddStandardSpots();
+            AddStandardCurveTraces();
+            Serialize();
+           
+        }
+        private void LoadXmlDocument (string path)
+        {
+            try
+            {
+                this.xmlDocument.Load(path);
+            }
+            catch (Exception)
+            {
+                throw;
+            }         
+        }
+        private void Serialize()
+        {
+            XmlSerializer x = new XmlSerializer(spotMeasurements[0].GetType());
+            x.Serialize(Console.Out, spotMeasurements[0]);
+            //x = new XmlSerializer(curveTraces[0].GetType());
+            //x.Serialize(Console.Out, curveTraces[0]);
+        }
+
+
+        private void AddStandardCurveTraces()
+        {
+            var curveTrace1 = new curveTrace()
+            {
+                name = "-1mA..+1mA;Steps:51;Limit:2V",
+                desc = "",
+                settlingTime = "0.01",
+                supplyName = "MKx-style (30V/5A)",
+                limit = "2",
+                forceType = "Current",
+                percentageOfLineCycle = "_10_",
+                compareAlgorithm = "Percentage",
+                maxVoltage = "10",
+                minVoltage = "10",
+                maxCurrent = "10",
+                minCurrent = "10",
+                voltageAutoRange = "false",
+                currentAutoRange = "false",
+                start = "-0.001",
+                stop = "0.001",
+                stepCount = "51",
+                initialSettlingTime = "0.01",
+                stepSettlingTIme = "0.002",
+                selfChecks = "OpenCircuit, ShortToGround"
+            };
+
+            this.curveTraces.Add(curveTrace1);
+
+        }
+
+        private void AddStandardSpots ()
+        {
+            var spotMeasurement1 = new spotMeasurement()
+            {
+                name = "-10uA; Limit: 2V",
+                desc = "",
+                settlingTime = "0.003",
+                supplyName = "MKx-style (30V/5A)",
+                limit = "2",
+                forceType = "Current",
+                percentageOfLineCycle = "_10_",
+                compareAlgorithm = "Percentage",
+                maxVoltage = "10",
+                minVoltage = "10",
+                maxCurrent = "10",
+                minCurrent = "10",
+                voltageAutoRange = "false",
+                currentAutoRange = "false",
+                spotCount = "1",
+                spots = new spot[] { new spot { stress = "-0.00001", minimum = "-1.9", maximum = "-0.1" } }
+            };
+
+            var spotMeasurement2 = new spotMeasurement()
+            {
+                name = "+10uA; Limit: 2V",
+                desc = "",
+                settlingTime = "0.003",
+                supplyName = "MKx-style (30V/5A)",
+                limit = "2",
+                forceType = "Current",
+                percentageOfLineCycle = "_10_",
+                compareAlgorithm = "Percentage",
+                maxVoltage = "10",
+                minVoltage = "10",
+                maxCurrent = "10",
+                minCurrent = "10",
+                voltageAutoRange = "false",
+                currentAutoRange = "false",
+                spotCount = "1",
+                spots = new spot[] { new spot { stress = "0.00001", minimum = "0.1", maximum = "1.9" } }
+            };
+
+            var spotMeasurement3 = new spotMeasurement()
+            {
+                name = "-1mA; Limit: 2V (SHORT/R)",
+                desc = "",
+                settlingTime = "0.003",
+                supplyName = "MKx-style (30V/5A)",
+                limit = "2",
+                forceType = "Current",
+                percentageOfLineCycle = "_10_",
+                compareAlgorithm = "Percentage",
+                maxVoltage = "10",
+                minVoltage = "10",
+                maxCurrent = "10",
+                minCurrent = "10",
+                voltageAutoRange = "false",
+                currentAutoRange = "false",
+                spotCount = "1",
+                spots = new spot[] { new spot { stress = "-0.001", minimum = "-0.200", maximum = "0.200" } } 
+            };
+
+            spotMeasurements.Add(spotMeasurement1);
+            //spotMeasurements.Add(spotMeasurement2);
+            //spotMeasurements.Add(spotMeasurement3);
+        }
+
+        private void BrowseButton_Click(object sender, RoutedEventArgs e)
+        {
+            OpenFileBrowser();
+        }
+
+        private void OpenFileBrowser ()
+        {
+            // Create OpenFileDialog
+            Microsoft.Win32.OpenFileDialog dlg = new Microsoft.Win32.OpenFileDialog();
+
+            // Set filter for file extension and default file extension
+            dlg.DefaultExt = ".txt";
+            dlg.Filter = "Text documents (.txt)|*.txt";
+
+            // Display OpenFileDialog by calling ShowDialog method
+            Nullable<bool> result = dlg.ShowDialog();
+
+            // Get the selected file name and display in a TextBox
+            if (result == true)
+            {
+                // Open document
+                string filename = dlg.FileName;
+                this.FileName = filename;
+            }
+        }
+    }
+            
+}

ScimitarStandardTemplate/ParametricOperation.cs

@@ -0,0 +1,46 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Xml.Serialization;
+
+namespace ScimitarStandardTemplate
+{
+    public class ParametricOperation
+    {
+        [XmlAttribute]
+        public string name { get; set; }
+        [XmlAttribute]
+        public string desc { get; set; }
+        [XmlAttribute]
+        public string settlingTime { get; set; }
+        [XmlAttribute]
+        public string supplyName { get; set; }
+        [XmlAttribute]
+        public string limit { get; set; }
+        [XmlAttribute]
+        public string forceType { get; set; } 
+        [XmlAttribute]
+        public string percentageOfLineCycle { get; set; }
+        [XmlAttribute]
+        public string compareAlgorithm { get; set; }
+        [XmlAttribute]
+        public string maxVoltage { get; set; }
+        [XmlAttribute]
+        public string minVoltage { get; set; }
+        [XmlAttribute]
+        public string maxCurrent { get; set; }
+        [XmlAttribute]
+        public string minCurrent { get; set; }
+        [XmlAttribute]
+        public string voltageAutoRange { get; set; }
+        [XmlAttribute]
+        public string currentAutoRange { get; set; }
+
+        public ParametricOperation()
+        {
+
+        }
+    }
+}

ScimitarStandardTemplate/Properties/AssemblyInfo.cs

@@ -0,0 +1,55 @@
+using System.Reflection;
+using System.Resources;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+using System.Windows;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("ScimitarStandardTemplate")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("ScimitarStandardTemplate")]
+[assembly: AssemblyCopyright("Copyright ©  2024")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components.  If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+//In order to begin building localizable applications, set
+//<UICulture>CultureYouAreCodingWith</UICulture> in your .csproj file
+//inside a <PropertyGroup>.  For example, if you are using US english
+//in your source files, set the <UICulture> to en-US.  Then uncomment
+//the NeutralResourceLanguage attribute below.  Update the "en-US" in
+//the line below to match the UICulture setting in the project file.
+
+//[assembly: NeutralResourcesLanguage("en-US", UltimateResourceFallbackLocation.Satellite)]
+
+
+[assembly: ThemeInfo(
+    ResourceDictionaryLocation.None, //where theme specific resource dictionaries are located
+                                     //(used if a resource is not found in the page,
+                                     // or application resource dictionaries)
+    ResourceDictionaryLocation.SourceAssembly //where the generic resource dictionary is located
+                                              //(used if a resource is not found in the page,
+                                              // app, or any theme specific resource dictionaries)
+)]
+
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]

ScimitarStandardTemplate/Properties/Resources.Designer.cs

@@ -0,0 +1,70 @@
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:4.0.30319.42000
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+
+namespace ScimitarStandardTemplate.Properties
+{
+    /// <summary>
+    ///   A strongly-typed resource class, for looking up localized strings, etc.
+    /// </summary>
+    // This class was auto-generated by the StronglyTypedResourceBuilder
+    // class via a tool like ResGen or Visual Studio.
+    // To add or remove a member, edit your .ResX file then rerun ResGen
+    // with the /str option, or rebuild your VS project.
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
+    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    internal class Resources
+    {
+
+        private static global::System.Resources.ResourceManager resourceMan;
+
+        private static global::System.Globalization.CultureInfo resourceCulture;
+
+        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
+        internal Resources()
+        {
+        }
+
+        /// <summary>
+        ///   Returns the cached ResourceManager instance used by this class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Resources.ResourceManager ResourceManager
+        {
+            get
+            {
+                if ((resourceMan == null))
+                {
+                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("ScimitarStandardTemplate.Properties.Resources", typeof(Resources).Assembly);
+                    resourceMan = temp;
+                }
+                return resourceMan;
+            }
+        }
+
+        /// <summary>
+        ///   Overrides the current thread's CurrentUICulture property for all
+        ///   resource lookups using this strongly typed resource class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Globalization.CultureInfo Culture
+        {
+            get
+            {
+                return resourceCulture;
+            }
+            set
+            {
+                resourceCulture = value;
+            }
+        }
+    }
+}

ScimitarStandardTemplate/Properties/Resources.resx

@@ -0,0 +1,117 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

ScimitarStandardTemplate/Properties/Settings.Designer.cs

@@ -0,0 +1,29 @@
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:4.0.30319.42000
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+
+namespace ScimitarStandardTemplate.Properties
+{
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "11.0.0.0")]
+    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase
+    {
+
+        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
+
+        public static Settings Default
+        {
+            get
+            {
+                return defaultInstance;
+            }
+        }
+    }
+}

ScimitarStandardTemplate/Properties/Settings.settings

@@ -0,0 +1,7 @@
+<?xml version='1.0' encoding='utf-8'?>
+<SettingsFile xmlns="uri:settings" CurrentProfile="(Default)">
+  <Profiles>
+    <Profile Name="(Default)" />
+  </Profiles>
+  <Settings />
+</SettingsFile>

ScimitarStandardTemplate/ScimitarStandardTemplate.csproj

@@ -0,0 +1,101 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{3E555A2D-DC3F-4234-9FB4-4076BBFD4A25}</ProjectGuid>
+    <OutputType>WinExe</OutputType>
+    <RootNamespace>ScimitarStandardTemplate</RootNamespace>
+    <AssemblyName>ScimitarStandardTemplate</AssemblyName>
+    <TargetFrameworkVersion>v4.7.2</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <ProjectTypeGuids>{60dc8134-eba5-43b8-bcc9-bb4bc16c2548};{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}</ProjectTypeGuids>
+    <WarningLevel>4</WarningLevel>
+    <AutoGenerateBindingRedirects>true</AutoGenerateBindingRedirects>
+    <Deterministic>true</Deterministic>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Xml" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="System.Net.Http" />
+    <Reference Include="System.Xaml">
+      <RequiredTargetFramework>4.0</RequiredTargetFramework>
+    </Reference>
+    <Reference Include="WindowsBase" />
+    <Reference Include="PresentationCore" />
+    <Reference Include="PresentationFramework" />
+  </ItemGroup>
+  <ItemGroup>
+    <ApplicationDefinition Include="App.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </ApplicationDefinition>
+    <Compile Include="ParametricOperation.cs" />
+    <Compile Include="spotMeasurement.cs" />
+    <Page Include="MainWindow.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
+    <Compile Include="App.xaml.cs">
+      <DependentUpon>App.xaml</DependentUpon>
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="curveTrace.cs" />
+    <Compile Include="MainWindow.xaml.cs">
+      <DependentUpon>MainWindow.xaml</DependentUpon>
+      <SubType>Code</SubType>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="Properties\AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="Properties\Resources.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DesignTime>True</DesignTime>
+      <DependentUpon>Resources.resx</DependentUpon>
+    </Compile>
+    <Compile Include="Properties\Settings.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Settings.settings</DependentUpon>
+      <DesignTimeSharedInput>True</DesignTimeSharedInput>
+    </Compile>
+    <EmbeddedResource Include="Properties\Resources.resx">
+      <Generator>ResXFileCodeGenerator</Generator>
+      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
+    </EmbeddedResource>
+    <None Include="Properties\Settings.settings">
+      <Generator>SettingsSingleFileGenerator</Generator>
+      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
+    </None>
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="App.config" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+</Project>

ScimitarStandardTemplate/curveTrace.cs

@@ -0,0 +1,25 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Xml.Serialization;
+
+namespace ScimitarStandardTemplate
+{
+    public class curveTrace : ParametricOperation
+    {
+        [XmlAttribute]
+        public string start { get; set; }
+        [XmlAttribute]
+        public string stop { get; set; }
+        [XmlAttribute]
+        public string stepCount { get; set; }
+        [XmlAttribute]
+        public string initialSettlingTime { get; set; }
+        [XmlAttribute]
+        public string stepSettlingTIme { get; set; }
+        [XmlAttribute]
+        public string selfChecks { get; set; }
+    }
+}

ScimitarStandardTemplate/spotMeasurement.cs

@@ -0,0 +1,50 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Xml.Serialization;
+
+namespace ScimitarStandardTemplate
+{
+    public class spotMeasurement : ParametricOperation
+    {
+        [XmlAttribute]
+        public string spotCount { get; set; }
+
+        [XmlElement("spot")]
+        public spot[] spots { get; set; }
+        //public int[] nee;
+
+        public spotMeasurement()
+        {
+
+        }
+    }
+
+    public class spot
+    {
+        /// <summary>
+        /// stress value
+        /// </summary>
+        [XmlAttribute]
+        public string stress { get; set; }
+
+        /// <summary>
+        /// minimum value
+        /// </summary>
+        [XmlAttribute]
+        public string minimum { get; set; }
+
+        /// <summary>
+        /// maximum value
+        /// </summary>
+        [XmlAttribute]
+        public string maximum { get; set; }
+
+        public spot()
+        {
+
+        }
+    }
+}